Buying a Used Sole F80 Treadmill in 2026: What to Check, Which Model, and What to Pay

A used Sole F80 treadmill in good working order trades between $600 and $1,100 in most of the country right now, against a machine that sells new for roughly $1,600 to $2,000 depending on the sale. That is the whole reason this post exists. The F80 is one of the few home treadmills worth buying secondhand, because the parts that usually kill a used treadmill (the motor and the deck) are the parts Sole overbuilt.

I help people buy and sell heavy fitness equipment for a living, and I have watched hundreds of treadmills get picked up out of basements and garages. I know which ones show up with 400 miles on them and which ones show up with a fried controller board. Sole sits firmly in the first group. Below is what a used F80 is worth, which version to hold out for, the seven things to check before money moves, and the failures that should make you walk.

What a used Sole F80 treadmill costs in 2026

Expect to pay $600 to $1,100 for a working used Sole F80 treadmill, and closer to $1,200 if it is a late touchscreen model that is barely broken in.

Here is how the market splits. Under $500 you are looking at a pre-2019 unit with the old blue LCD console, visible belt wear, and a seller who wants it gone this weekend. Those can be great buys if the motor is healthy, because the motor is the expensive part. Between $600 and $900 is the fat middle: a five to seven year old machine, low hours, one owner, usually a "we moved and it doesn't fit" sale. Above $1,000 you should be getting a recent touchscreen model with under a year of use.

Two things move price more than anything else. A treadmill in a finished basement sells for hundreds less than the identical machine in a ground-floor spare room, purely because most buyers cannot move it. And a dead console turns a $900 machine into a $250 parts machine in most buyers' eyes, even when the fix is a $12 reed switch. I broke the wider depreciation numbers down in our guide to what a used treadmill is actually worth.

Which Sole F80 model year to look for

Buy the newest console you can afford, because the frame and motor barely changed while the console changed a lot.

You do not need to memorize model years. You just need to know what you are looking at in the photos:

• Older units (roughly pre-2019): a blue backlit LCD readout ringed with physical buttons. No app connection worth using. Mechanically these are fine. The console is the weak point, and replacement consoles for this era are getting harder to source.
• Middle units (roughly 2019 to 2022): larger LCD, Bluetooth for heart rate straps and app syncing. This is the sweet spot for value. A modern drive system without the touchscreen premium.
• Recent units (roughly 2023 on): a 10.1 inch color touchscreen with the Sole+ app built in. Nicer to use daily. Also the version most likely to have a console problem, because a touchscreen has more to go wrong than a button panel.

The mechanical spine is consistent across all of them: a 3.5 CHP continuous-duty motor, a 22 by 60 inch running belt, 15 levels of powered incline, a 12 mph top speed, and a 375 pound user capacity. That belt width matters more than people expect. A 22 inch belt is what separates a treadmill you can run on from a treadmill you walk on and tolerate.

If you are cross-shopping the rest of the line, I put all three side by side in our Sole F63 vs F80 vs F85 comparison. Short version: the F80 is the one most people should buy.

What to check on a used Sole F80 treadmill before you pay

Run the machine for a full ten minutes at walking speed, then at 6 mph, then at full incline. Almost every real defect shows itself inside those ten minutes.

1. Power it on and watch the console wake up. A dead screen, flickering segments, or a console that resets mid-workout is an electrical problem you cannot price from a photo.
2. Walk on it at 3 mph and listen. You want a low even hum. A rhythmic thump usually means a flat spot on a roller. A high whine under load points at the motor or a slipping drive belt.
3. Push to 6 mph and plant your feet hard. If the belt hesitates or surges when you land, it is loose, glazed, or the deck is dry. Loose is a five minute fix. Glazed is a new belt.
4. Run the incline all the way up and back down. Grinding, stalling, or a motor that goes up but not down is an incline motor failure. Budget a few hundred dollars installed.
5. Look at the belt edges and the center wear line. Fraying plus a shiny polished stripe down the middle means the belt is done. That is a $150 to $250 part plus an hour of work.
6. Slide your hand under the belt and feel the deck. It should be slick, not sticky or gritty. Dry decks kill motors. A dry deck on an otherwise clean machine tells you the owner never maintained it.
7. Fold it up and lower it. The hydraulic assist should take the weight. If the deck slams down, the shock is done. Not a dealbreaker, but it is a negotiating point.

Ask for the hour count if the console shows one, and ask when the deck was last lubricated. A seller who answers both without hesitating tells you a lot about how the machine was treated.

The red flags that should make you walk away

Walk away from a burning smell, a bent frame, or a seller who will not plug it in.

The one I see most is "it works, I just have it unplugged right now." Sometimes that is true. Often it is a console that does not boot. There is no version of buying a used treadmill where you skip the power-on test.

The genuinely disqualifying problems are short and specific. A hot electrical or burnt plastic smell during the test run means the motor or the lower control board is cooking, and that repair costs more than the machine is worth used. Frame damage from a previous move is not fixable at a sensible price. Water damage, usually from a basement, shows up as rust on the frame welds and corrosion around the motor cover, and it only gets worse.

Cosmetic scuffs, faded side rail decals, a worn belt, and a tired hydraulic shock are all fine. Those are price adjustments, not reasons to walk.

Sole F80 vs F63 vs F85: what the extra money buys

The F80 is the value pick. The F63 is the compromise. The F85 is for runners over 200 pounds who log serious mileage.

Spec	Sole F63	Sole F80	Sole F85
Motor	3.0 CHP	3.5 CHP	4.0 CHP
Belt size	20 x 60 in	22 x 60 in	22 x 60 in
Incline	15 levels	15 levels	15 levels
User capacity	325 lb	375 lb	400 lb
Typical used price	$400 to $700	$600 to $1,100	$900 to $1,500
Best for	Walking, light jogging	Daily running, most households	Heavy runners, multiple users

Used, that spread makes the F80 the obvious answer. F63 to F80 costs a couple hundred dollars and buys two more inches of belt width plus a stronger motor. F80 to F85 costs another few hundred and buys half a horsepower most people never use.

Is a used Sole F80 treadmill worth it versus buying new?

Yes, and it is one of the clearer yes answers in used fitness equipment.

Here is the math. A new F80 runs around $1,600 to $2,000 depending on the promotion. A clean four year old one costs $800. You keep $800 to $1,200 on a machine whose motor is rated for far more hours than the average household will ever put on it. Most home treadmills die from neglect and moving damage, not mileage.

What you give up is the factory warranty. If you will actually file a claim in year six, that is real value. If you will not, you are paying about a thousand dollars for paperwork. Buying used is not risk-free, though. The risk sits in two places: you cannot fully test a machine from a listing photo, and you have to move 280 pounds of steel out of someone else's house.

How to buy one without moving 280 pounds yourself

This is the part that actually stops most used treadmill purchases, so I want to be direct about it.

A Sole F80 weighs roughly 280 pounds assembled. It does not go down a staircase upright and it does not fit in an SUV. Renting a truck and recruiting a friend costs you a Saturday and a real chance of denting a drywall corner. And the moment it is in your garage, the private sale is final. If the incline motor grinds, that is now your incline motor.

That is the specific problem Commonplace was built for. You reserve the item for a dollar. Background-checked drivers go to the seller's house, run a 30 to 50 point inspection on site, and text you six or more HD photos plus a video of the machine actually running before it gets loaded. The seller gets paid the moment it is on the truck. Then the drivers bring it to you, set it up in the room you want it in, and you get 60 minutes to test it in your own home. If it is not right, you reject it and get a full refund. You and the seller never meet.

One buyer put it plainly in a review: he got a great deal on a used tread, and the crew video called him during pickup so he could see the condition before it left the seller's driveway. Another had his delivered within 48 hours, and Norman had it running properly in 45 minutes. Everything on the marketplace also carries a free 60-day warranty, which covers the window where a hidden mechanical problem shows up. Here is how the whole process works.

Compressed into a decision matrix:

1. Ground floor, working console, under $700, and you own a truck. Buy it locally, today.
2. Basement or second floor. Do not move it yourself. Budget for delivery or buy one that is already handled.
3. Seller will not power it on. Pass, at any price.
4. Touchscreen model under $1,000 with low hours. The best value in the whole F80 range. Move fast.
5. Belt is glazed but everything else is clean. Offer $200 under asking and budget for a new belt.
6. Any burning smell, any frame damage, any rust on the welds. Walk.

Frequently asked questions

How long does a Sole F80 treadmill last?

Fifteen years is realistic for a machine that gets lubricated once or twice a year. The motor is rated well beyond typical household use. What ends most F80s early is a move that bends the frame, or a dry deck that took the motor down with it.

What is a fair price for a used Sole F80?

Between $600 and $1,100 for a working machine, with the low end being older LCD consoles and visible belt wear, and the high end being recent touchscreen models with low hours. Below $500, inspect carefully. Above $1,200, you are approaching new-with-a-sale territory.

Can you run on a Sole F80 or is it just for walking?

You can run on it. The 22 inch by 60 inch belt and 3.5 CHP motor are genuinely running-capable, which is not true of most treadmills at this price point new, let alone used. Belt width is the single biggest reason to pick the F80 over the F63.

Do I need to worry about the touchscreen on newer models?

A little. The touchscreen is the most failure-prone part of the recent units, and a replacement console is not cheap. Test every function: speed, incline, the fan, the heart rate grips, the app connection. If the screen is glitchy at pickup, it will not get better.

Is it hard to move a Sole F80 treadmill?

Yes. Roughly 280 pounds, it folds but does not disassemble easily, and it does not go down stairs safely with two people. This is the number one reason used treadmill deals fall apart. If you are selling one, our guide on how to sell a treadmill covers what to do about it.

The bottom line

If you have an F80 collecting laundry in a spare room, it is worth real money, and you do not have to wrestle it down a staircase to get it. List it free, our drivers handle the pickup and the de-install, and you get paid the moment it is loaded. No strangers in your house, no lowball texts at 11pm.

And if you are buying, a used Sole F80 treadmill is one of the best value plays in home cardio right now. Browse inspected used treadmills on Commonplace, or read our broader used treadmill buying guide for 2026 if you are still picking a model. Every machine gets inspected before it leaves the seller, and you still get an hour in your own home to change your mind.