How to move a Pilates reformer: unhook the springs, lift the carriage off the rails, remove the footbar and carry the frame on its side. 8 steps and tools.

Here's how to move a Pilates reformer: unhook the springs, take off the ropes and straps, lift the carriage off the rails, remove the footbar and any platform or tower, then carry the frame on its side with two people. Most full-size reformers are about 7 to 8 feet long and too heavy and awkward for one person, but once the carriage comes off, a two-person crew can get the frame through a standard doorway and down a staircase. The big mistake I see is carrying a reformer assembled, which lets the carriage slam into the end of the rails and can bend the wheels or the frame.
I run Commonplace, a marketplace for big, heavy items, and Pilates reformers are a regular pickup for our drivers: Balanced Body Allegro 2 and Studio reformers, Merrithew SPX machines, AeroPilates home units, and reformers with towers and Cadillac frames attached. Below are the steps I'd follow, the tools you need, how to protect your floors and the machine, and how pros price the job.

Yes, two people can move most Pilates reformers themselves once the carriage and springs are off. One person can't do it safely, and nobody should carry one up stairs fully assembled.
The difficulty depends on what kind of reformer you have:
| Reformer type | Crew | Take it apart? | Watch out for |
|---|---|---|---|
| Home folding reformer (AeroPilates style) | 1 to 2 people | Fold it, cords off | Elastic cords snapping back, folding hinge |
| Aluminum studio reformer (Allegro 2, SPX) | 2 people | Carriage, springs, footbar off | Legs, rail alignment, carriage wheels |
| Wood studio reformer | 2 to 3 people | Carriage, springs, footbar, platform off | Weight, wood frame dings, long length |
| Reformer with tower or half Cadillac | 2 to 3 people | Tower comes off first | Tower uprights, push-through bar springs |
| Full Cadillac or trapeze table | 3 to 4 people | Yes, frame and canopy apart | Height, ceiling clearance, many bolts |
The quotable rule for moving a Pilates reformer: the carriage always comes off the rails first. A loose carriage rolling end to end is how reformers get damaged in a move.
The tools you need to move a Pilates reformer are basic hand tools plus a lot of padding. Most reformers are held together with hex bolts, knobs and pins.
If your reformer has a tower, add a step stool. Tower bolts are easier to reach from slightly above, and you don't want someone stretching overhead while holding a steel upright.

Moving a Pilates reformer safely means taking it apart in a set order so nothing is under tension and nothing can roll. This is the order I'd follow.
Never leave the carriage on the rails with the springs off and the frame tilted. It will roll to the end and hit the stopper hard. That's how wheels get flat spots and how frames get dented.
A Pilates reformer almost always needs partial disassembly to move, and almost never needs the frame itself taken apart. Here's what I'd do with each piece.
Folding home reformers are the exception. Fold them, strap the fold, and carry them like a long box.

The best protection when moving a Pilates reformer is a measured path and padding on both ends of the frame. A 7- or 8-foot frame turning a corner is where walls and door frames take hits.
Measure the frame's narrowest dimension on its side and the tightest door and hallway turn. If it's close, take the door off its hinges. Lay cardboard or a runner from the studio to the truck and tape the edges down. Wrap door frames at waist and shoulder height.
For the reformer itself, the predictable damage is:
And keep every part together. Reformers listed with "missing footbar" or "springs not included" sell for noticeably less, which you can see in my breakdown of what a used Pilates reformer is worth.
The cost to have a Pilates reformer professionally moved depends on distance, stairs and whether a tower or Cadillac is involved. I won't give a national average I can't back up, because local quotes vary a lot. Here's how pricing usually works.
If you're moving the reformer because you're done with it, selling it where it sits usually makes more sense. When someone sells a reformer on Commonplace, our drivers handle the disassembly, inspection and delivery to the buyer, and the seller gets paid at pickup. Start at sell your Pilates reformer, or read my full guide on how to sell a used Pilates reformer.
Reassembling a Pilates reformer is the same job in reverse, and your photos do most of the work. Set the frame down on a level floor first, because a reformer on an uneven floor will make the carriage drift. Slide the carriage onto the rails, replace the end stop, and roll it end to end to feel for any catch. Bolt the footbar back on at the height you photographed. Then hook the springs back on one at a time and route the ropes exactly as they were.
Test it before anyone works out on it. Do a slow footwork set at light resistance and listen for clicks, grinding or a carriage that pulls to one side. If something feels off, check the rail bolts and the carriage wheels before blaming the springs. If you're buying a reformer that someone else moved, my guide to the used Balanced Body Allegro 2 lists what to check.
It depends on the model and frame. Home folding reformers are light enough for one or two people. Aluminum and wood studio reformers are much heavier, and a reformer with a tower or a Cadillac frame is heavier still. Check your model's spec sheet, and plan on two people minimum for any studio reformer.
Yes, in pieces. With the carriage, springs, footbar and tower off, two people can carry the frame on its side up a standard staircase. Tight landings are the real limit, so measure the turn before moving day.
Always. Springs left on can stretch, tangle or snap the carriage back during the move. Unhook them, coil them and keep them in a labeled bag.
Some can. Many general movers won't disassemble specialty fitness equipment, so ask directly when you get a quote. Fitness equipment installers handle it routinely.
On Commonplace. Browse used Pilates reformers, and our drivers inspect each one at pickup and deliver it. You pay only after it passes inspection.
Selling yours? List your reformer on Commonplace and let our drivers take it apart, carry it out and deliver it. You never meet the buyer, and you get paid when it's loaded.
Buying? See the Pilates reformer buying guide for the models worth considering, then browse inspected reformers near you.