Used Cryotherapy Machine for Sale: What a Chamber Costs and What to Verify
A used cryotherapy machine for sale runs $2,725 to $60,225 depending on type. Real prices, nitrogen vs electric, power needs, and what to verify before paying.
A used cryotherapy machine for sale spans an enormous range, and the range is the whole story. Whole-body chambers have traded on our platform between about $19,275 and $60,225, against original retail figures of $45,519 to $125,000. Localized and aesthetic cryo devices, the handheld and body-contouring machines people often mean when they type the same search, trade between roughly $2,725 and $9,975. Those are two completely different purchases, and buyers conflate them constantly.
I help people buy and sell large equipment for a living, and cryo gear has the widest gap between what the listing says and what you are actually taking on. A chamber is a commercial refrigeration system with a person-sized door on it. Compressor, control board, safety interlocks and, often, a power requirement your building does not have. So this covers what these machines cost used, how nitrogen and electric differ to own, what to verify before money moves, the recurring expenses nobody lists, the space and power you need, and what this gear resells for when a studio closes.
One thing up front, because it shapes the purchase. The U.S. Food and Drug Administration has stated in its consumer guidance on whole body cryotherapy that it has not cleared or approved any whole-body cryotherapy device for treating any medical condition. Buy this equipment as a wellness amenity and price it accordingly. If you plan to make health claims to clients, that is a conversation for your own counsel, not a blog post.
What a Used Cryotherapy Machine for Sale Actually Costs
A used whole-body cryo chamber costs roughly 40 to 60 percent of its original retail, and the discount is steepest on older nitrogen units.
Here is what has actually moved, with the original retail alongside it:
| Machine | Type | Year | Used price | Retail new |
|---|---|---|---|---|
| Cryobuilt Everest Peak | Electric walk-in | 2024 | $60,225 | $125,000 |
| IMPACT Wellness 12-Series Cryosauna | Nitrogen | 2016 | $30,400 | $45,519 |
| Cryo Innovations XR | Nitrogen | n/a | $30,225 | $50,000 |
| Cryo Innovations XR whole-body | Nitrogen | n/a | $19,275 | $52,577 |
| Regenesis Exoskin (cryoslimming, EMS) | Aesthetic device | 2025 | $9,975 | $20,000 |
| TingMay TM-920 portable | Localized | 2021 | $2,725 | $7,000 |
Two patterns are worth pulling out of that table. First, a nearly new electric chamber still takes better than 50 percent off retail, because the pool of buyers who can actually install one is small. Second, the cheapest machines lose the least in absolute dollars. A portable that retailed at $7,000 selling for $2,725 costs its owner $4,275. A chamber that retailed at $125,000 selling for $60,225 costs its owner nearly $65,000. If you are buying, that asymmetry is entirely in your favor at the top of the market.
One more thing the data shows. Some brand-new-in-box aesthetic devices list barely below retail, in the range of $7,900 against $8,236. That is not a used price. That is a dealer clearing inventory. Do not treat a 4 percent discount as a used-market deal just because the word "used" appears in the listing.
Nitrogen Versus Electric: The Decision That Sets Your Running Cost
Nitrogen machines are cheaper to buy and more expensive to own. Electric chambers are the reverse.
A nitrogen cryosauna is the familiar upright cabin where the user stands with their head above the rim. It cools by releasing vaporized liquid nitrogen into the cabin. That means a dewar of liquid nitrogen on site, a delivery relationship with a gas supplier, and a per-session consumable cost that never goes away. It also means the room needs an oxygen monitor and real ventilation, because nitrogen displaces oxygen as it evaporates. That is not a scare story, it is standard practice, and if the seller has no oxygen monitor in the room, treat it as a signal about how the rest of the machine was maintained.
An electric walk-in chamber cools with a refrigeration circuit instead. No nitrogen, no dewar deliveries, no oxygen monitor, whole body including the head. The tradeoff is the power draw and the price of entry. I pulled the nameplate off an Everest Peak that came through us: 208 to 240 volts, three phase, 60 hertz, 49 full load amps, 56 minimum circuit ampacity, 81 maximum overcurrent protection. Read that again if you are shopping for a home or a small studio. Three phase power is common in commercial buildings and almost nonexistent in residential ones. If your space is single phase, an electric chamber is either off the table or a rotary phase converter project with its own cost.
So the honest split. If you are running a studio in a commercial building with three phase service and you want the lowest cost per session over five years, buy electric. If you need the lowest entry price, are fine managing a gas supplier, and have a room you can properly ventilate and monitor, buy nitrogen.
What to Verify Before You Pay
Never buy a cryo machine that has not been run in front of you at full pull-down.
Work this list in order:
- Watch a full cooling cycle. The machine should reach operating temperature from ambient while you stand there. Pull-down is where a tired compressor or a low refrigerant charge exposes itself. A machine shown powered on but not cooling tells you nothing.
- Get compressor hours and the service history in writing. Commercial refrigeration is judged by run hours, not calendar years. A 2016 unit from a low-volume studio can be in better shape than a 2022 unit from a busy one.
- Test every safety interlock. The door release from inside, the automatic shutoff timer, the emergency stop. On nitrogen units, the oxygen sensor and its alarm. These are the parts that make the machine legal to operate and expensive to repair.
- Boot the control system and read the fault log. Modern chambers log their own errors. Ask the seller to scroll through it. Recurring faults that were cleared rather than fixed are the single most useful thing you will learn all day.
- Confirm the electrical requirement against your actual panel. Photograph the nameplate. Voltage, phase, FLA and MOCP. Send that photo to an electrician before you commit, not after.
- Ask directly whether the warranty transfers. On most commercial equipment it does not. Get the answer in writing either way, and get the manufacturer's current parts-support status for that model while you are at it.
- Check the drip pan, coil screen and cabinet seals. Standing water, heavy frost on the coil or perished door gaskets all point to a machine that has been run hard without upkeep.
The reason I push so hard on seeing it run is that this equipment is almost always sold by someone who is closing or downsizing, and it is often already disconnected when you arrive. On our platform items get inspected before they move and you get time with the item before you pay for it, which matters far more on a $30,000 machine than on a treadmill. The process is laid out on our how it works page.
The Ongoing Costs Nobody Puts in the Listing
Budget for four recurring line items, and get real numbers from the seller rather than estimating.
Nitrogen, if you buy nitrogen. It is metered per session and arrives by delivery. Do not accept a per-session figure from a forum. Ask the seller for twelve months of gas invoices and their session count over the same period, then divide. That is your real number.
Electricity, if you buy electric. A chamber that pulls 49 full load amps at 240 volts is not a rounding error on a utility bill, and most studios pre-cool for a couple of hours before opening. Again, ask for bills.
Maintenance. Refrigeration systems need a tech, and a cryo tech is not a general HVAC tech. Find out who services that brand within driving distance of you before you buy, because a machine you cannot get serviced is a machine you cannot run. Ask the seller who they used.
Insurance. Any operator-attended equipment where a client steps inside a sealed enclosure carries a liability conversation. Talk to your carrier before the machine arrives, not after.
Space, Power, and Ventilation
A whole-body chamber needs a dedicated room, not a corner.
Plan on roughly 6 by 6 feet for the machine plus clear working space on the service side, and ceiling height that clears the cabinet with room above it. Add the step platform most units use at the door. Then the things people forget: a path from the driveway that clears the cabinet width, a floor that carries a heavy point load, and an ambient temperature the refrigeration can reject heat into. A chamber in an unventilated closet in Phoenix will struggle.
For nitrogen units, ventilation and an oxygen monitor are non-negotiable, and the dewar needs a secured, ventilated spot of its own. For electric units, the question is the panel. Get the electrician's quote before you buy the machine.
If this is starting to sound like more building work than you expected, that is the honest answer, and it is worth comparing against a used cold plunge or a used sauna, both of which deliver a recovery amenity at a fraction of the install complexity.
Localized Cryo and Cryoslimming Are a Different Purchase
A cryoslimming or localized cryo device is an aesthetic treatment machine, not a whole-body chamber, and it should be evaluated on completely different terms.
These are the $2,725 to $9,975 machines in the table above. Cryolipolysis body-contouring units, handheld localized applicators, and combination cryo and EMS devices. They plug into a standard outlet, they fit in a treatment room, and they need no nitrogen and no three phase power. What they need instead is applicator condition, consumable availability, and software or licensing that still works.
Three things to check. Are the applicators and gel membranes still manufactured. Does the machine need a per-treatment card, key or cloud license the seller can actually transfer. And does your state require a license or supervision to operate it, which varies enormously and is worth confirming before you buy. Machines in this class come through our medical spa category regularly.
Who Buys Used Cryo Gear When a Studio Closes
The buyers are other studios, gyms adding a recovery room, physical therapy and chiropractic practices, hotels and country clubs, and a small number of private buyers with commercial-grade space.
That is a narrow pool, and it is why resale takes patience and why the discounts are so steep. If you are the seller, the two things that move your machine are proof it runs and honesty about the install. A short video of a full pull-down cycle with the temperature display visible is worth more than any amount of description. Listing the nameplate photo saves you from three weeks of buyers who discover on day twenty that they do not have three phase power.
Price it against the band in the table, not against what you paid. And handle the logistics question before it comes up, because a buyer two states away will not pursue a machine they cannot figure out how to move. Our guide to selling used gym equipment covers the same playbook for lighter gear, and you can list a cryo machine the same way. Browse the recovery side of the catalogue under cold plunge and recovery.
Frequently Asked Questions
How much is a used cryotherapy machine for sale?
Whole-body chambers have traded between about $19,275 and $60,225 on our platform, against $45,519 to $125,000 retail. Localized and cryoslimming devices run roughly $2,725 to $9,975. Where a specific machine lands depends far more on compressor hours and whether it can be demonstrated running than on its model year.
Is nitrogen or electric cheaper to own?
Electric, over any meaningful time horizon, because there is no consumable. Nitrogen is cheaper to buy and to install, so it wins on entry cost and loses on year three. The deciding factor is usually whether your building has three phase power.
Can you put a cryotherapy chamber in a house?
Usually not an electric walk-in, because residential buildings are single phase and these units are commonly specified at 208 to 240 volts three phase. A nitrogen cryosauna is more feasible physically but brings a liquid nitrogen supply, ventilation and oxygen monitoring into a home, which most people decide against once they understand it.
Does the warranty transfer on used cryo equipment?
Usually no. Commercial equipment warranties are generally tied to the original purchaser and the original install address. Ask the manufacturer directly, not the seller, and ask in the same call whether they still stock parts for that model.
What is the single biggest mistake buyers make?
Paying for a machine they have only seen powered off. A cryo chamber that will not hold temperature is worth scrap value, and you cannot tell the difference from a photograph. Watch a full cooling cycle or walk away.
If you are selling a chamber because a studio is closing, the logistics are the part that stalls these deals, and they are the part we handle. Drivers pick it up, it gets inspected, and payment is sorted rather than left to a wire transfer with a stranger.
And if you are buying, the discipline is simple even though the machine is not. Verify the power before the price. Watch it run before you pay. Get compressor hours and service records in writing. Do those three things and a used cryotherapy machine is one of the best value purchases in commercial wellness equipment, because the depreciation curve is brutal for the person who bought it new and generous to the person who buys it second.