Commonplace
Sell an itemMy account
Home/Blog/Pianos/How to Move or Take Apart a Piano: Crew of 4, Tools, and Pro Costs
Pianos

How to Move or Take Apart a Piano: Crew of 4, Tools, and Pro Costs

How to move a piano safely: crew size, the dolly and straps you need, what comes apart on a grand, and what pros charge (about $425 on average).

Commonplace
Research
November 20, 2026 · 15 min read
More guides →

Here's how to move a piano without wrecking it, your floors or your back: plan on four people for an upright, a four-wheel piano dolly, moving straps and blankets, and a ramp or a piano board for any stairs. A grand comes partly apart (legs, lyre and lid) and travels on its side, strapped to a padded board. If you'd rather pay, national averages from Angi and HomeAdvisor put a professional piano move at about $425, with most jobs between roughly $259 and $591.

I help people buy and sell big, awkward things for a living, and pianos are the item that most often turns a casual "we'll just roll it out" into a cracked floor tile and a sprained wrist. They're dense, top-heavy and fragile in all the wrong places. So this guide covers whether you can do it yourself, the gear you need, what actually comes apart, the step-by-step move, how to protect the house, what the pros charge, and what to do once it lands. If you're really trying to get the piano out of your life rather than across town, my guide on how to get rid of a piano covers selling, donating and hauling.

Can you move a piano yourself?

Yes, you can move an upright piano yourself on flat ground, but only with four capable adults and the right dolly. A grand, or any piano going up or down stairs, is where I'd call a pro.

The reason is weight and where it sits. A small spinet or console upright is usually in the 300 to 400 pound range. A full-size studio or professional upright often runs 500 pounds or more, and almost all of that mass is the cast iron plate inside, sitting high and toward the back. Baby grands are commonly 500 to 650 pounds, and a concert grand can top half a ton. That's not a sofa. When an upright starts to tip, four people can't catch it. They can only get out of the way.

So here's my honest rule. Same floor, smooth path, no more than a step or two? Do it yourself. Stairs, a grand, an antique with a veneer you care about, or a doorway that needs the piano tilted? Hire it out. The few hundred dollars is cheaper than one injury or one dropped piano.

And don't trust the little casters on the bottom of an older upright. On a lot of pianos they're decorative, brittle, or seized. Roll a 500-pound piano on them across hardwood and you'll leave a groove you'll be looking at for the next decade.

Tools and equipment you need to move a piano

The single most important tool for moving a piano is a proper four-wheel piano dolly rated well above the piano's weight. Everything else is protection and grip.

Here's the kit I'd want on hand before anyone touches it:

  • Piano dolly (four-wheel, padded, rated for 1,000 pounds or more). Rental shops and some truck rental counters carry them.
  • Piano board, also called a skid board, for grands. It's a padded plank the piano is strapped to while on its side.
  • Moving straps or lifting harnesses so people lift with their legs and shoulders, not their fingertips.
  • Six to ten moving blankets plus stretch wrap or tape to hold them on (tape on blankets only, never on the finish).
  • Ratchet straps to secure the piano upright against the truck wall.
  • A loading ramp or a truck with a lift gate. Lifting a piano into a truck bed by hand is how people get hurt.
  • Floor protection: hardboard sheets or floor runners for the path.
  • Basic hand tools: screwdrivers and a socket set for grand legs and lyre, plus zip bags and a marker for hardware.
  • Work gloves with grip for everyone on the crew.

One thing I don't recommend: an appliance hand truck. It's built for a fridge's footprint and balance, not a piano's. The piano's center of gravity is different, and the narrow base makes it far too easy to tip.

Tools to move a piano: padded piano dolly, ratchet straps, lifting harnesses, moving blankets and stretch wrap in front of an upright piano

Does a piano need to be taken apart to move it?

An upright piano does not get taken apart for a move; a grand piano partly does. That's the short answer, and it matters because a lot of people try to remove parts from uprights that should stay put.

For an upright, close and lock the fallboard (the key cover) and the top lid, or tape them shut over a blanket so nothing scratches. Some people pull the front panels to save a few pounds. I don't. The weight is in the plate and the case, not the panels, and loose panels are just more things to lose.

For a grand or baby grand, the move goes like this. The lid comes off at its hinges (lift it off the hinge pins, or unscrew the hinges, and wrap it separately because it's the easiest part to crack). The music desk slides out. The lyre, the pedal assembly underneath, unscrews and comes off. Then the crew tilts the piano onto its straight side, onto the padded piano board, and removes the legs one at a time while it's supported. The body is strapped to the board and the whole thing rides on the dolly. Bag and label every screw with where it came from.

The action, strings and keys never come out for a move. That's piano technician work, and nobody moving a piano should be inside it.

How to move a piano in 8 steps

Moving an upright piano safely is mostly about planning the path and controlling the tilt. Here's the order I'd run it in.

  1. Measure everything. Piano depth, height and width, plus every doorway, hallway turn and stair landing on the route. An upright usually clears a standard door on its back edge or on the dolly; check before moving day, not during it.
  2. Clear and protect the path. Move rugs and furniture, lay floor protection, and pad door frames.
  3. Close and wrap the piano. Lock or tape the lids over a blanket, then wrap the whole case in blankets and stretch wrap.
  4. Position the crew. One person on each end, one at the keyboard side, one spotting and calling the moves. Only one person talks.
  5. Lift onto the dolly. Tilt the piano back just enough to slide the dolly under, lowering it evenly. Never lift it by the keyboard lip or the legs on an upright; lift from the case bottom.
  6. Roll slowly and keep it upright. Uprights travel standing up. Turns are where they tip, so go slow at corners and thresholds.
  7. Load with a ramp or lift gate. Push it up the ramp with people on the downhill side controlling it, then set it against the front wall of the truck.
  8. Strap it in. Ratchet strap it to the truck wall with the keyboard facing the wall, with blankets between. Nothing should be able to shift.

For a grand, steps one through four are the same, then the disassembly from the section above happens before step five, and the piano rides on its board.

How to protect doors, floors and the piano itself

Protecting the house is mostly about keeping the piano's weight on wheels and off the floor, and keeping hard edges off door frames. Most damage I hear about happens in the last ten feet, not on the highway.

On hardwood, lay hardboard sheets or heavy runners along the full route. A loaded dolly on bare hardwood can still dent soft species like pine. On carpet, the dolly will want to sink and drag; plywood sheets make it roll. For door frames, wrap them in blankets and tape the blankets to the trim (not the paint).

For the piano itself, the big risks are the finish, the lid hinges and the legs on a grand. Wrap the case fully. Keep it out of direct heat and rain during loading. And keep it upright in transit; laying an upright on its back or side can stress the case and the soundboard.

Stairs deserve their own warning. One of our buyers lived in a fifth-floor walk-up, and our team got the item up five flights without a scratch. That worked because the crew does stairs all day. An untrained group of friends on stairs with a piano below them is the exact scenario I'd pay a pro to avoid.

Upright piano wrapped in moving blankets on a piano dolly in a hallway with floor protection and a padded door frame

What does it cost to have a piano professionally moved?

A professional piano move costs about $425 on average nationally, according to Angi and HomeAdvisor, with typical jobs between roughly $259 and $591 and outliers from $150 to over $1,000. The type of piano and the stairs drive most of the difference.

Piano typeTypical weightDisassembly neededReported local pro cost
Spinet or console upright300 to 400 lbNoneAround $150 to $250
Studio or full upright400 to 800 lbNoneAround $250 and up
Baby grand500 to 650 lbLid, lyre, legsAround $450 to $550
Full or concert grandUp to 1,000+ lbLid, lyre, legsHigher; long-distance grands can reach about $2,000

Cost figures are rough national numbers from Angi, HomeAdvisor and reporting that cites them. Long-distance and cross-state moves can roughly double local prices. Stairs, tight turns and long carries add to the quote, so describe your route honestly when you ask for one.

My take: get two quotes from piano-specific movers, not general movers who "can do pianos." Ask if they carry a piano board and insurance, and whether the price includes stairs. A piano mover who asks you how many steps there are is a good sign.

After the move: setting the piano back up

Once a piano is in its new spot, let it sit and acclimate before tuning. Most technicians suggest waiting a couple of weeks, because the temperature and humidity change will move the pitch anyway.

For a grand, reattach the legs while it's still on its side on the board, then tilt it back up onto them with the full crew, then refit the lyre and lid. Check the pedals work before anyone leaves. For an upright, roll it into place and set it off the dolly evenly. Keep it off exterior walls and away from heat vents and windows if you can; stable humidity is what keeps it in tune.

If a piano gets moved because it's being sold, the sale itself can handle the move. When a piano sells on Commonplace, our team handles the pickup and delivery, the buyer checks it on arrival, and the seller never has to recruit three friends. You can see what's out there in used pianos for sale, and the full process is on how Commonplace works.

Blanket-wrapped upright piano strapped against the wall of a box truck with a loading ramp

FAQ: moving a piano

How many people does it take to move a piano?

Four is the number I'd plan on for an upright on one level: two on the ends, one at the keyboard side and one spotter. A grand, or any piano on stairs, needs a trained crew, and that's where most people should hire a piano mover.

Can you lay a piano on its back to move it?

No, not an upright. Uprights should travel standing up and strapped to the truck wall. Grands are the exception: they travel on their straight side, strapped to a padded piano board after the legs, lyre and lid come off.

Does a piano need tuning after a move?

Usually yes. The move itself and the change in temperature and humidity will shift the pitch, so let the piano settle for about two weeks in its new room, then book a tuning.

Is it cheaper to move a piano or sell it and buy another?

It depends on the piano. For a common upright on a long-distance move, the moving bill can approach what the piano would sell for, and selling it locally often makes more sense. For a quality grand you love, pay the movers. Start with my guide on how to sell a used piano if you're weighing it.

Can I use the piano's wheels to roll it?

Only for a few inches, and only on a hard floor you don't care about. Casters on many older uprights are decorative or brittle. Use a piano dolly for anything more.

If you'd rather not move it at all, list it. Sell your piano on Commonplace and our team handles the pickup, so your floors and your back stay out of it. You can also start any listing from our sell page.

And if you're on the other side of this, looking for a piano that someone else already got out the door, browse inspected used pianos on Commonplace. We bring it to you.