Commonplace
Sell an itemMy account
Home/Blog/Lawn and riding mowers/How to Move a Riding Mower: Ramps, Straps, and 6 Takedown Steps
Lawn and riding mowers

How to Move a Riding Mower: Ramps, Straps, and 6 Takedown Steps

How to move a riding mower safely: the ramps and straps you need, how to take off the deck in 6 steps, why you back it up the ramp, and how to strap it down.

Commonplace
Research
November 16, 2026 · 13 min read
More guides →

Here's how to move a riding mower without hurting yourself or the machine: shut off the fuel, disconnect the spark plug wire, pull the bagger and (if it's going a long way) the mower deck, then back it up a pair of rated ramps into a trailer or truck and strap the frame down at four points. Two people make it safe. One person and a steep ramp is how mowers end up on their side in the driveway.

I run Commonplace, a marketplace for big, heavy things people don't want to haul themselves, and riding mowers are one of the most awkward items our crews pick up. They're heavy, top-heavy, full of fuel and oil, and they don't fit through a normal door. This guide covers how many people you need, the tools, how to take a riding mower apart for transport, how to load and strap it, and what to do if you'd rather not move it at all. If you're moving it because you're selling it, you can list your riding mower on Commonplace and our crew handles the pickup.

Can You Move a Riding Mower Yourself?

How to move a riding mower: lawn tractor lined up with aluminum loading ramps and a utility trailer

Yes, you can move a riding mower yourself if you have a trailer or a truck, a pair of loading ramps rated for the weight, and a second person to spot you.

The weight is the first thing to respect. Most residential lawn tractors weigh somewhere in the 400 to 600 pound range, and bigger garden tractors and zero-turns go well past that. Check the spec sheet for your exact model before you pick ramps. That number decides everything else.

Here's the short version of who should do what:

  • Across the yard or into a shed: one person. Drive it there.
  • Into a pickup or utility trailer: two people. One drives, one spots and watches the ramp alignment.
  • Up stairs, into a basement, or into a vehicle with no ramps: don't. Hire it out or have the buyer's crew handle it.

A riding mower is not a couch. You can't tip it on end and walk it through a doorway. So the real question isn't "can I lift it," because you can't. It's "do I have a safe way to drive it onto something."

Tools You Need to Move a Riding Mower

The tools that matter most when you move a riding mower are the ramps and the straps. Everything else is a nice-to-have.

ItemWhy you need itWhat to look for
Loading ramps (pair)Gets the mower onto the trailer or truck bedCombined rating well above the mower's weight, plus your weight if you ride it up
Ratchet straps (4)Holds the mower in place in transitRated straps with hooks that fit frame points, not plastic
Wheel chocksStops rolling while you strapTwo is enough
Socket set and pliersDeck removal and spark plug wireMost deck pins and linkages need basic hand tools
Work glovesBelts, blades and sharp deck edgesCut-resistant if you're touching the blades
Moving blankets or cardboardProtects the hood, seat and your truck bedAny old blanket works

A common rule of thumb for ramps is a length of about four times the height of the bed you're loading into. Longer ramps mean a gentler angle, and a gentler angle is the whole game. If your truck bed is high, a low utility trailer is the safer choice.

How to Take Apart a Riding Mower for Transport

Taking apart a riding mower for transport usually means removing three things: the bagger, the mower deck, and sometimes the seat. You almost never need to go further than that.

Start with safety. Park on a flat, hard surface, set the parking brake, turn the key off and take it out. Then pull the spark plug wire off the plug so the engine can't fire while your hands are near the blades. If your owner's manual says to disconnect the battery for deck work, do that too.

Now the takedown, in order:

  1. Remove the bagger. Rear baggers and chutes lift off on most models. They're light, bulky and easy to break in transit, so they ride separately.
  2. Lower the deck to its lowest cutting position. This puts slack in the drive belt.
  3. Slip the belt off the engine pulley. On most lawn tractors you can reach the belt from the side once the deck is down.
  4. Disconnect the deck linkages. These are usually pins with clips or a few bolts at the front and the lift arms. Keep every pin in a labeled bag.
  5. Slide the deck out. Turn the front wheels and pull the deck out from the side. It's heavy and awkward, so this is a two-person job.
  6. Take photos as you go. Reassembly is a lot faster when you can see where each pin and belt went.

Your exact steps depend on your model. Deere, Cub Cadet, Husqvarna and Craftsman all do it a little differently, and your owner's manual has the right sequence. If you don't have the manual, most manufacturers post them free on their websites by model number.

Do you need to remove the deck at all? For a short drive across town on a trailer, usually not. For a long haul, a tight truck bed, or a mower going to a buyer who'll inspect it, pulling the deck makes it lighter, lower and less likely to get bent.

Riding mower with its deck removed for transport, deck, belt and pins laid out on cardboard in a garage

Fuel, Oil and Battery: Prep Before You Move a Riding Mower

Before you move a riding mower, run the fuel low, keep the mower level, and never lay it on its side with fuel and oil inside.

Fuel and oil are where people get into trouble. Tip a mower the wrong way and oil runs into the air filter and carburetor. Then it smokes, won't start, or both. Keep it upright the entire trip.

  • Fuel: run it down to a small amount, or close the fuel shutoff valve if your model has one. A full tank sloshing around on a trailer is a fire risk and a mess.
  • Oil: check the level and make sure the cap is tight. Don't overfill before a move.
  • Battery: make sure the terminals are tight and covered. If the battery is weak, charge it now. A mower that won't start at the destination has to be pushed off the trailer, which is miserable.
  • Tires: air them up. A soft tire makes ramp loading wobbly.

If the mower is going into winter storage after the move, this is a good time to add fuel stabilizer or drain the tank, depending on what your manual recommends.

How to Load and Strap a Riding Mower Safely

The safe way to load a riding mower is to back it up the ramps in reverse, slowly, with a spotter, then strap the frame to the trailer at four corners.

Why reverse? A riding mower carries most of its weight at the back, under the seat and engine. Backing up a ramp keeps that weight toward the uphill side, which makes it far less likely to tip over backward. Many manufacturers recommend exactly this, so check your manual and follow it if it says something different.

Step by step:

  1. Park the trailer or truck on level ground and set its brake.
  2. Line up the ramps with the mower's rear wheels and hook them securely to the bed. Ramps that slip mid-load are the number one cause of accidents.
  3. Have your spotter stand to the side, never behind or in front of the mower.
  4. Back up the ramps in a low gear at a steady, slow speed. Don't stop halfway and don't turn the wheel on the ramp.
  5. Once it's on, set the parking brake and chock the wheels.
  6. Run four ratchet straps from the frame (axles or frame rails, never the steering wheel, seat or plastic hood) to the trailer's tie-down points, pulling in opposite directions.
  7. Tug the mower hard by hand. If it moves, tighten again.

Unloading is the reverse: drive forward down the ramps slowly, with the spotter off to the side.

Ratchet strap hooked to a riding mower frame on a trailer with a wheel chock behind the rear tire

Protecting the Mower, Your Vehicle and Your Garage

Protecting a riding mower during a move comes down to padding the contact points and keeping loose parts from rattling around.

Throw a moving blanket over the hood and seat before you strap, so the strap hooks and buckles don't scratch the paint. Put cardboard under the deck if it rides in a truck bed. Lay the bagger and any loose parts flat, on a blanket, away from the mower so they can't slide into it.

On the house side, the risk is the garage floor and the doorway. Mowers with turf tires are usually fine on concrete, but a leaky one will mark the floor, so put down cardboard where it sits overnight. When you drive it out of a garage or shed, check the clearance on both sides of the doorway first. The deck is often the widest part, and doorframes get gouged that way.

What It Costs to Have a Riding Mower Moved

The cost to move a riding mower depends on distance and whether you need a trailer, and the honest answer is that local quotes vary a lot.

If you own a trailer, the move costs you a Saturday morning and maybe a set of ramps. If you don't, you can rent a utility trailer from a truck rental place for the day. Local haulers and small-engine shops will also move a mower, and many lawn equipment dealers offer pickup when you bring a unit in for service. Get two or three quotes and ask whether loading and strapping are included.

If the reason you're moving it is that you're selling it, skip the whole thing. On Commonplace, the buyer's delivery is handled by our crew. You set the take-home price, we pick it up from your driveway, check it over on site, and you get paid when it's loaded. You don't rent a trailer, you don't back anything up a ramp, and you never meet a stranger. Our how it works page walks through the full process.

Not sure what yours is worth before you decide? Our guide to what a used riding mower is worth has real resale ranges by brand.

Mistakes I See When People Move a Riding Mower

The most common riding mower moving mistakes are steep ramps, driving up forward, and strapping to the wrong parts.

  • Short ramps on a tall truck. The angle is too steep and the front wheels lift. Use longer ramps or a low trailer.
  • Driving up forward. It's the natural instinct, and it's the one most likely to flip the mower backward.
  • Strapping the steering wheel. It bends the column and the mower still slides.
  • Tipping it on its side to fit. Oil ends up where it shouldn't, and now it won't start.
  • Leaving the bagger on. It cracks at the first pothole.
  • Losing the deck pins. Bag them and tape the bag to the seat.

None of these are rare. They're just easy to avoid if you slow down.

FAQ: Moving a Riding Mower

Can I move a riding mower in a pickup truck?

Usually yes, with long enough ramps. Measure the bed first, since many lawn tractors with the deck on are a tight fit and the tailgate may need to stay down. Strap it at four points and keep it level.

Should I drive a riding mower up the ramp forward or backward?

Backward. Backing up the ramps keeps the heavy rear end on the uphill side, which lowers the risk of tipping. Drive forward to come down. Follow your owner's manual if it gives different instructions.

Do I have to remove the mower deck to move a riding mower?

Not for a short trailer trip. Removing the deck makes sense for long hauls, tight truck beds, or any move where the deck could get bent, and it takes most people well under an hour with basic hand tools.

Can a riding mower be laid on its side?

Avoid it. Laying a riding mower on its side can send oil into the air filter and carburetor and fuel out of the tank. Keep it upright and level for the whole move.

How much does a riding mower weigh?

Most residential lawn tractors land in the 400 to 600 pound range, and garden tractors and zero-turns can weigh much more. Your model's spec sheet has the exact figure, and that's the number to use when you pick ramps.

Selling instead of moving? Sell your riding mower on Commonplace and our crew loads it for you. Read where to sell a lawn mower if you're still comparing options.

Buying one? Browse used riding mowers that our crew delivers, and read our guide to buying a used riding lawn mower before you pay.