Commonplace
Sell an itemMy account
Home/Blog/Pool tables/Used Pool Table Buying Guide: Olhausen, Brunswick and What to Pay
Pool tables

Used Pool Table Buying Guide: Olhausen, Brunswick and What to Pay

Used pool table buying guide: which slate tables to buy, room sizes, what to inspect, and why a good 8-foot table runs about $750 to $1,500 before moving.

Commonplace
Research
November 21, 2026 · 12 min read
More guides →

Here's the short answer to this used pool table buying guide: buy a three-piece slate table from an established maker like Olhausen or Brunswick, in the size your room can actually hold, and expect to pay roughly $750 to $1,500 for a good 7 or 8-foot table from a private seller. Then budget another few hundred dollars to have it professionally moved and releveled. Skip MDF and "slate-like" tables entirely, no matter how cheap.

I help people buy and sell big, heavy things for a living, and pool tables are one of the strangest. Buying the table is often the cheap part. Moving it, recovering it and getting it level again is where people lose money and patience. So this guide covers which used pool tables are worth buying, which to skip, how to size your room, what to inspect, what to pay, the red flags in a listing, and how delivery and setup work. If you're selling instead, start with my guide on how to sell a used pool table.

Which used pool tables are worth buying?

The used pool tables worth buying are slate tables from makers that built them to last for decades, because a well-built slate table plays the same in year 30 as it did in year one.

Olhausen. Olhausen tables are made in the US and are probably the most common quality home table on the used market. They're solid wood, the slate is usually three-piece, and parts and installers who know them are easy to find. Olhausen's lifetime warranty is for the original owner, so don't count on it for a secondhand table. Buy one for the build, not the paperwork.

Brunswick. Brunswick has made home and commercial tables for well over a century. A used Brunswick home table is a safe buy. A used Gold Crown, the commercial table you've seen in pool halls, is a very serious table but also extremely heavy, and it's more than most basements need.

Other quality makers. Diamond is the name serious players know, especially for bar-size tables. Connelly, Presidential, Golden West and C.L. Bailey also show up in good used condition. Older tables from regional furniture makers can be great too, as long as the slate is real and the frame is solid.

What these share is the formula that matters: real slate, a hardwood frame and legs that can carry the weight, and rails with good cushion rubber. The brand is a shortcut to that formula. It isn't a substitute for checking it.

Used pool table buying guide: a wood slate pool table with green cloth in a daylit game room

Which used pool tables to skip

The used pool tables to skip are anything without real slate, because MDF and particleboard playing surfaces sag, warp and can't be fixed.

Department-store tables often use MDF or a synthetic "slate alternative." They look fine in the listing photos. Then the first humid summer hits and the bed develops a dip that sends every slow roll to the same spot. No amount of leveling fixes a warped bed, and by the time you've paid to move one, you've spent more than it's worth.

I'd also be cautious with one-piece slate tables in a home. One-piece slate isn't bad, but it's one enormous, fragile slab, so moving it is harder and riskier, and you can't fine-tune the level across seams the way you can with three-piece slate.

And skip any table already sitting in pieces in a garage, with no labels and a coffee can of mixed screws. Some of those go back together fine. Many are missing something, and you won't know what until a mechanic is standing in your basement.

What size used pool table fits your room?

An 8-foot pool table needs a room roughly 13 by 17 feet to play every shot with standard 58-inch cues, and a 7-foot table needs a bit less.

This is the mistake I see most often. People buy the table first and measure the room second. Then they own a beautiful 9-foot table they can only play with a short cue on two sides. Measure the playing room before you even message a seller, and remember that pillars, stair rails and furniture count against you.

Table sizeCommon nameRoom it needs (58-inch cues)Best for
7-footBar boxAbout 12.5 by 16 feetSmaller rooms, casual play, bar-style games
8-footHome standardAbout 13 by 17 feetMost basements and game rooms
8-foot "pro" (8.5)Oversize 8About 13.5 by 17.5 feetSerious players with a big room
9-footTournamentAbout 14 by 18.5 feetLarge dedicated rooms only

If your room is a little short, a 48-inch or 52-inch cue for the tight side solves most of it. If it's a lot short, buy the smaller table. Nobody enjoys a table they can't shoot around.

What should you pay for a used pool table?

For a good used pool table like an 8-foot Olhausen or Brunswick, a fair private-sale price is usually around $750 to $1,500, before moving and setup.

That's not a guess. It's in line with what experienced players on billiards forums report for playable Olhausen and Brunswick tables, and with recent sold listings for 7 and 8-foot slate tables that cleared between roughly $500 and $1,500. Dealer blogs quote higher numbers for pre-owned Olhausens, in the low thousands. Those can be fair for a table that a dealer has already moved, recovered and installed for you. They aren't fair for a table you still have to move yourself.

Then add the costs that come with the table. Professional pool table moves are commonly quoted somewhere around $300 to $800, depending on distance and stairs. New cloth is often part of the job, because the old cloth is stapled to the slate and usually doesn't survive coming off. And you want a pool table mechanic to level it, because a table that's slightly off ruins every slow shot.

So the real comparison isn't "$900 table versus $4,000 new table." It's "$900 table plus moving, cloth and leveling" against new, or against a used table a dealer has already set up. Do that math before you make an offer.

Used pool table with cloth and rails removed showing three-piece slate during an inspection

What to inspect on a used pool table before you pay

The most important thing to inspect on a used pool table is the slate, followed by the frame, the rails and the cloth, in that order.

  1. Confirm it's slate. Look underneath. Slate is gray stone, usually backed with a wood frame glued to the underside. If you see uniform brown board, it's MDF or particleboard.
  2. Count the pieces and check the thickness. Three-piece slate is standard on good tables. Thickness of 3/4 inch or more is what you want.
  3. Look for cracks and chips. Check the slate edges and the seams from underneath with a flashlight. A crack through a slab is a deal-breaker.
  4. Roll a ball slowly. On the existing setup, roll a ball gently across the table in several directions. A consistent drift to one spot can be a leveling issue or a sagging bed. Ask the seller if it was leveled recently.
  5. Test the rails. Bank a ball off each rail at medium speed. Every rail should rebound the ball crisply and about the same. Dead, thuddy spots mean the cushion rubber has hardened and needs replacing.
  6. Check the frame and legs. Push on the corners. Nothing should rack, creak or wobble. Look for cracked leg joints and water damage at the feet.
  7. Check the pockets and cloth. Torn leather pockets and worn, pilled cloth are cheap fixes, but they're also negotiating points.

If the table has already been taken apart, you lose the roll test and the rail test. Price that uncertainty into your offer.

Red flags in a used pool table listing

The biggest red flag in a used pool table listing is "slate" with no brand, no photos of the underside and no answer when you ask how thick it is.

Here are the others I watch for:

  • "Buyer must remove." Normal for pool tables, but it means every moving cost is yours. Price accordingly.
  • "Already disassembled." Ask for photos of every piece of slate and every rail, plus the hardware. Missing slate screws, rail bolts or pocket hardware add up.
  • "Just needs new felt." Sometimes it's true. Sometimes the felt is hiding a crack or a badly filled seam.
  • Stored in a garage or shed. Humidity swings are rough on wood frames, and rodents love pocket leather.
  • A price far below every other slate table near you. Either it's not slate, it's damaged, or the seller is in a hurry. Find out which before you show up with a truck.

And the scam to know: listings that ask for a deposit to "hold" a table you haven't seen, or that route the move through a mover the seller picked. Don't send money for a table you haven't inspected.

How delivery and setup work for a used pool table

A used slate pool table has to be taken apart to move, which means removing the rails, pulling the cloth, unscrewing and lifting out the slate, and then reversing every step and releveling at the new house.

I walk through every step in how to move or take apart a pool table. The short version: each slate piece of an 8-foot table can weigh a couple of hundred pounds, the seams need to be filled and leveled again, and the cloth usually gets replaced. It's a job for a crew and, at the end, a mechanic with a machinist's level.

Pool table slate, rails and legs wrapped in moving blankets and strapped inside a box truck

This is where buying through Commonplace takes the hard part off your plate. Our team picks the table up from the seller, inspects it, and delivers it to you, and you pay only after it passes inspection. You never meet a stranger in their basement, and you never haul slate yourself. You can see how that works on how Commonplace works.

FAQ: buying a used pool table

Is a used slate pool table worth it?

Yes. A used slate table from a good maker is one of the best values in home game-room furniture, because the slate doesn't wear out. Most of what wears (cloth, cushions, pockets) is replaceable.

How can I tell if a pool table is real slate?

Look underneath. Real slate is gray stone, usually with a wood backer glued on, and the table will be very heavy. A light table with a uniform brown board underneath is MDF.

Is an Olhausen or a Brunswick better used?

Both are good used buys, and condition matters more than the badge. I'd take a well-kept Olhausen over a tired Brunswick, and the other way around too.

Do I need to recover a used pool table after moving it?

Usually, yes. The cloth is stapled or glued to the slate and rarely survives removal, so plan on new cloth as part of the move.

Can you move a slate pool table without taking it apart?

Only a few feet across the same room, with a crew and care. For anything else, it comes apart. Moving it assembled risks cracking the slate or racking the frame.

Got a table you're done with? Sell your pool table on Commonplace and our team handles pickup, so you don't have to find movers or host strangers. You can start any other listing from our sell page.

And if you're shopping, browse used pool tables for sale on Commonplace. Every one is inspected before it gets to your door.