Commonplace
Sell an itemMy account
Home/Blog/Med spa equipment/How to Move or Take Apart Med Spa Equipment: Lasers, Chairs, 8 Steps
Med spa equipment

How to Move or Take Apart Med Spa Equipment: Lasers, Chairs, 8 Steps

How to move med spa equipment: what to prep on lasers and energy devices, the tools, an 8-step move plan, protecting the device, and how pricing works.

Commonplace
Research
November 20, 2026 · 15 min read
More guides →

Here's how to move med spa equipment without voiding a warranty or knocking a laser out of calibration: treat every energy-based device (lasers, IPL, RF and body contouring units) as a manufacturer-service job first and a moving job second. Call the manufacturer or an authorized service tech before the move, follow the device's own transport procedure (that can mean draining internal cooling water and pulling consumables), keep it upright and padded, and plan a service check after it lands. Treatment chairs, carts and furniture are ordinary heavy moves you can handle with two people and a dolly.

I help clinics and owners buy and sell used aesthetic equipment, and the most expensive mistakes I see aren't dents. They're a laser that was shipped with water in it, a handpiece that rode loose in a box, or a device that lost its service history in the shuffle. So this guide covers what you can move yourself, the tools, what comes apart, an 8-step move plan, how to protect the device and the building, how professional moves are priced, and what to do on the other side. If you're moving it because you're selling it, start with my guide on how to sell used med spa equipment.

Can you move med spa equipment yourself?

You can move med spa furniture yourself, but you shouldn't move an aesthetic laser or energy device yourself without the manufacturer's procedure in hand. That's the honest split.

Treatment chairs, rolling stools, carts, magnifying lamps and cabinets are just heavy furniture. Two people, a dolly and blankets will do it. Power chairs are heavier and have motors and wiring, but they still move like a recliner with extra care on the base.

Lasers and other energy-based devices are a different category. They're sealed medical devices with optics, internal cooling systems, delicate articulated arms or fiber delivery, and expensive handpieces. A lot of them are also heavy and top-heavy on small casters. The big risk isn't that you'll drop it (though that happens). It's that a move done the wrong way voids coverage, introduces damage nobody sees until the first patient, or leaves the device unable to pass its post-move check. One source on laser purchasing from the American Med Spa Association notes the manufacturer is typically the only source for parts and service on a laser. That's exactly why they belong in the move plan.

My rule: furniture, DIY. Anything that fires energy, call the manufacturer first and let them tell you what you can and can't do.

Tools and equipment you need to move med spa equipment

The core tools for moving med spa equipment are a flat-deck dolly or pallet jack, padding, and the original (or equivalent) crating for anything with optics. Here's the full list I'd gather:

  • The operator's manual and service contact for every device. This is the most important tool on the list.
  • Original shipping crates or cases if you still have them, especially for handpieces and articulated arms.
  • Flat furniture dolly or pallet jack rated well above the device's weight.
  • Moving blankets and stretch wrap to cover the cabinet without touching optics or ports.
  • Foam-lined boxes for handpieces, tips, cables and footswitches.
  • Ratchet straps and a truck with a lift gate or ramp.
  • Drain kit (hose and container) if the device's procedure calls for draining cooling water.
  • Labels, zip bags and a camera for cables, keys and accessories.
  • Floor protection for clinic hallways and elevator thresholds.

Photograph every port and cable connection before unplugging anything. When the service tech arrives at the new location, those photos save time, and time is what you pay them for.

Laser handpieces, delivery cable, footswitch and tips packed in foam-lined hard cases for a med spa equipment move

Does med spa equipment need to be taken apart to move it?

Most med spa equipment doesn't need to be taken apart to move it, but nearly every energy device needs to be prepared: accessories removed, consumables pulled, and sometimes fluids drained. The cabinet itself stays whole.

Here's how that breaks down by type.

EquipmentComes apart?Typical prepWho should do it
Aesthetic lasers and IPLAccessories onlyRemove handpieces, tips, footswitch; follow the manual's transport steps, which may include draining internal water or removing a cryogen canisterManufacturer or authorized tech, at least for prep
Body contouring and RF unitsAccessories onlyRemove applicators and cables; protect screens; follow the manualManufacturer or authorized tech for prep
Hydrodermabrasion systemsAccessories onlyEmpty and flush fluid bottles and lines; cap portsOwner, following the manual
Power treatment chairsSometimes (headrest, armrests)Lower fully, unplug, secure the cord and remoteOwner or general movers
Carts, stools, cabinetsDrawers and shelves outEmpty, tape doorsOwner or general movers

Never open a laser cabinet to "make it lighter." There's nothing in there that's meant to come out for a move, and opening it can void the warranty on the spot.

How to move med spa equipment in 8 steps

A safe med spa equipment move runs on a checklist, and the first step happens weeks before the truck shows up.

  1. Call each manufacturer. Ask for the transport or relocation procedure, whether a tech must prepare the unit, whether the move affects the warranty or service contract, and what a post-move check costs.
  2. Schedule the service visits. Book the pre-move prep and the post-move check together so the device isn't down longer than it has to be.
  3. Document everything. Photograph each device, record serial numbers and the shot or pulse counter where there is one, and gather service records.
  4. Pull accessories and consumables. Handpieces, tips, applicators, cables and footswitches go into padded, labeled boxes that travel with you, not loose in the truck.
  5. Prep fluids. Drain or flush only as the manual says. Water left in a cooling system can freeze in a cold truck in winter, and that's a costly repair.
  6. Wrap the cabinet. Blanket and stretch wrap the body, keeping wrap off optics and ports. Lock casters before any lift.
  7. Load upright and strap it. Use a lift gate or ramp. Strap the device upright against the truck wall, with blankets between. No stacking on top.
  8. Unload, rest, then service. Let the device come to room temperature before power-up, then have the tech reconnect, check and test it.
Aesthetic laser cabinet wrapped in moving blankets on a flat dolly beside padded elevators in a medical office building

How to protect doors, floors and the device itself

Protecting med spa equipment in a move comes down to three things: keep it upright, keep it at a sane temperature, and keep the small expensive parts with a person, not in a pile.

Upright matters because many devices are tall cabinets on small casters with heavy components inside. Tipping one even briefly can stress internal mounts. Lift with a flat dolly under the base rather than tilting it onto a two-wheel hand truck.

Temperature matters because of fluids, electronics and condensation. Don't leave a device in an unheated truck overnight in winter or a hot one in summer. When it arrives, give it time to acclimate before power-up so condensation doesn't form on cold internals.

For the building, clinic suites tend to have narrow hallways, tight elevator doors and polished floors. Lay runners, pad door frames and elevator walls, and measure the elevator's door width and cab depth against the device before move day. Book the freight elevator if the building has one.

And the handpieces. A single handpiece can be one of the costliest parts of a system to replace. They ride in the cab with you, in foam, every time.

What does it cost to have med spa equipment professionally moved?

The cost of professionally moving med spa equipment isn't published the way piano or furniture moving costs are, because it's two separate bills: the manufacturer's (or tech's) service charge for prep and post-move check, and the mover's charge for transport. I couldn't find reliable public price ranges for either, so I won't make one up.

Here's how the pricing works so you can ask the right questions:

  • Service charges come from the manufacturer or an authorized service provider. Ask for a written quote for prep, reinstallation and calibration or performance verification, and whether travel time is billed. Independent laser service companies exist and often quote lower than manufacturers, but check how that affects any warranty.
  • Transport charges come from a mover. A medical-equipment or specialty mover with lift gates, air-ride trucks and experience with sensitive electronics will quote by weight, distance, stairs and elevator access.
  • Downtime is the hidden cost. Every day a revenue-producing device is offline costs you treatments, so the scheduling in step two matters as much as either quote.

If you're buying a used device and moving it to your clinic, add one more line: some manufacturers charge a transfer or recertification fee before they'll service a device that changed hands. Ask before you buy, not after. I go into what to verify on a used laser in my Candela GentleMax Pro used price guide.

Blanket-wrapped laser cabinet and treatment chair strapped upright in a box truck with a lift gate

After the move: getting back to treatments

Before the first patient, every energy device should be reconnected, powered up after acclimating, and checked by the tech, with the results written down. That record matters for your own safety logs and for the device's resale value later.

Recheck the accessories against your packing photos, confirm the counter matches what you recorded, and test the footswitch and interlocks. For chairs, run every motor through its full range. For hydrodermabrasion systems, refill and run a cleaning cycle.

If the move is part of closing or downsizing a practice, selling equipment you don't need is often cheaper than moving it. When med spa equipment sells on Commonplace, our team handles pickup and delivery and the buyer inspects it before paying. You can see what's listed in used med spa equipment for sale, and how the process runs on how Commonplace works. If cryotherapy is part of your setup, my guide to used cryotherapy machines covers that equipment too.

FAQ: moving med spa equipment

Can I move a laser without the manufacturer?

Physically, maybe. Practically, I wouldn't. Moving a laser outside the manufacturer's procedure can affect the warranty or service contract, and the device should be checked after any move anyway, so involve them from the start.

Does a laser need recalibration after a move?

Plan on a post-move service check either way. Whether it needs formal calibration depends on the device and the manufacturer, so ask them when you schedule the move.

How should a laser travel in the truck?

Upright, padded, strapped to the truck wall, with casters locked and nothing stacked on it. Handpieces and fibers travel separately in foam-lined cases.

Can a laser freeze during a move?

Yes, if the device holds cooling water and the procedure calls for draining it. Water left inside in a cold truck can freeze and damage the system, which is why the drain step and a temperature-controlled schedule matter in winter.

Is it cheaper to sell med spa equipment than move it?

Sometimes. For a device you're not using much, the combined service, transport and downtime costs can make selling it and buying the right device later the better deal. For a device that pays for itself every week, move it properly.

If you're ready to sell instead of move, list your med spa equipment on Commonplace and our team handles the pickup. You can also start any listing from our sell page.

And if you're equipping a new room, browse used med spa equipment on Commonplace. We deliver it, and you check it before you pay.