Commonplace
Sell an itemMy account
Home/Blog/Saunas/How to Move a Sauna: 8 Steps to Take Apart an Infrared or Cabin Sauna
Saunas

How to Move a Sauna: 8 Steps to Take Apart an Infrared or Cabin Sauna

How to move a sauna: cut the power, pull the bench and stones, take the panels apart roof first, label every wire, and know when barrel saunas need a crew.

Commonplace
Research
November 17, 2026 · 11 min read
More guides →

Here's how to move a sauna: shut off the power at the breaker (and have an electrician disconnect it if it's hardwired), pull the bench, backrest and any heater stones, then take the cabin apart in the reverse order it was built, usually roof first, then the front and glass door, then the walls, then the floor. Label every panel and photograph every wire connection. Most indoor infrared and cabin saunas are panel kits built to come apart, so moving a sauna is mostly a careful two-person job, not a demolition.

I run Commonplace, a marketplace for big, heavy things people would rather not move themselves, and saunas are one of the wellness items our crews take apart, haul and set back up. The panels aren't especially heavy on their own. What makes a sauna move go wrong is a lost bracket, a pinched wire between panels, or a glass door that gets set down on its corner. This guide covers how many people you need, the tools, how to take apart an infrared or traditional sauna, what to do with a barrel or outdoor sauna, how to protect the glass and your floors, and when to hand it off. If you're moving it because you're selling it, you can list your sauna on Commonplace and our crew handles the takedown.

Can You Move a Sauna Yourself?

Yes, you can move a sauna yourself if it's an indoor panel-kit sauna and you have a second person. Outdoor barrel and built-in-place saunas are a different job.

Here's how I'd sort it by type:

  • 1 to 2 person infrared cabin: two people, a few hours, basic tools. This is the easiest kind to move.
  • 3 to 4 person infrared or traditional cabin: two people minimum, three is better for the roof and the long wall panels.
  • Traditional sauna with a hardwired heater: an electrician for the disconnect and reconnect, then a normal panel takedown.
  • Outdoor barrel sauna: usually moved whole on a trailer or with equipment, or taken apart stave by stave. Plan for a crew.
  • Custom built-in sauna framed into a room: this is a remodel, not a move. Most people sell or leave these.

The deciding question is simple. Was it delivered in flat boxes and assembled in the room? Then it can come apart the same way. Find the owner's manual (most manufacturers post assembly manuals by model on their websites) and you have your takedown instructions, read backward.

Tools You Need to Move a Sauna

The tools you need to move a sauna are basic. What matters more is a system for keeping the parts straight.

ItemWhy you need it
Cordless drill and screwdriver bitsMost panels, roof and bench use screws
StepladderReaching the roof panel and top fasteners
Painter's tape and a markerLabeling every panel and its orientation
Zip-top bagsOne bag per joint for screws, clips and brackets
Moving blankets (6 or more)Wrapping wood panels so they don't scuff or dent
Cardboard corner protectorsThe tempered glass door and any glass front panel
Furniture dollyRolling stacked panels to the truck
Ratchet strapsHolding panels upright on edge in the truck
Your phonePhotos of every wire connection before you unplug it

Measure the floor panel and the largest wall panel before moving day, then measure the doorways and stairwells on the path. Panels are big flat rectangles, and a big flat rectangle has to pivot around corners. Knowing the numbers ahead of time tells you which way each panel needs to travel.

How to Take Apart an Infrared Sauna

How to move a sauna: infrared sauna wall panels wrapped in moving blankets with the bench and floor panel beside them

Taking apart an infrared sauna means reversing the assembly: roof off first, floor out last. Most infrared cabins are held together with buckle latches or screws at the corners, and the heater panels are wired to each other through connectors at the seams.

  1. Kill the power. Unplug it, or switch off the breaker if it's hardwired. Hardwired units need an electrician to disconnect at the junction.
  2. Remove the loose parts. Bench, backrest, floor mat, lighting covers, speakers and any accessories come out first.
  3. Photograph the wiring. Before you unplug anything inside the cabin, take clear photos of every connector, especially where wires run from the roof down to the walls and heaters.
  4. Disconnect and label. Unplug each connector and put a strip of tape on both ends with a matching letter. Tuck loose wires so they won't catch when panels move.
  5. Lift the roof. Remove the roof fasteners and lift it straight up with two people. This is where a third person helps.
  6. Remove the front. On most models the front wall and glass door come off together. Keep the glass vertical and never set it down on a corner.
  7. Remove the side walls, then the back wall. Undo the latches or screws one corner at a time while someone holds the panel.
  8. Lift out the floor. Last piece out, first piece back in.

Label each panel with its position (front, back, left, right, roof, floor) and an arrow for "up." Bag the hardware from each joint separately and tape the bag to the panel it came from. That's the whole trick to a fast reassembly.

How to Take Apart a Traditional or Outdoor Sauna

A traditional indoor cabin sauna comes apart like an infrared one, with one extra step: the heater. Outdoor saunas depend completely on how they were built.

For a traditional sauna, let the heater cool fully, then lift out the sauna stones and box them. Stones are heavy, they rattle loose in transit, and they can crack the heater elements if they shift. The heater itself is almost always hardwired, so an electrician disconnects it, and it travels separately, upright and padded. After that, the panel takedown is the same as above.

Outdoor barrel saunas are built from long wooden staves held in a circle by steel bands. Some owners move them whole on a flatbed or trailer, which keeps the barrel intact but takes equipment and a clear path. Taking one apart means loosening the bands evenly and numbering every stave in order. It's doable, but it's slow, and staves that dry out or swell differently can be hard to seat again.

Outdoor cabin saunas framed on site, especially with a roof and electrical run, are closer to moving a shed. Unless it was sold as a kit, I'd treat it as something you sell in place.

How to Protect the Sauna, Your Floors and Doorways

Sauna wall panel and glass door strapped upright in a box truck with blankets and corner protectors

The parts of a sauna that get damaged in a move are the soft wood edges, the glass, and the wiring. Protecting them is mostly padding and patience.

  • Wrap every panel in a moving blanket. Hemlock, basswood and cedar are soft woods that dent easily. Wrap the edges especially.
  • Carry glass upright. Tempered glass is strong across the face and fragile at the corners. Tape cardboard corners on and keep it vertical.
  • Stand panels on edge in the truck. Stack them against the wall, wrapped, with straps at two heights. Never lay heavy things on top of flat panels.
  • Protect the house. Lay cardboard or hardboard on the floor along the path, and pad the door frames where panels pivot.
  • Keep heater panels dry. If it's raining, panels with heaters stay wrapped and inside until the last second.

How to Set a Sauna Back Up After a Move

Two-person infrared cabin sauna reassembled in the corner of a finished basement

Set the sauna back up on a level, solid floor near the right outlet, then rebuild it in reverse: floor, back, sides, front, roof, then the wiring and bench.

Check the power before you start. Smaller infrared saunas often plug into a standard outlet, while larger infrared and most traditional heaters need a dedicated 240-volt circuit. Your manual lists the exact requirement, and if the new room doesn't have it, an electrician should add it before the sauna goes in.

Once the walls are up, reconnect each wire using your photos and the matching tape labels. Turn it on and check that every heater panel warms up before you put the bench back in. A heater panel that stays cold almost always means a connector at a seam didn't seat.

Should You Hire Pros to Move a Sauna?

Hire it out when the sauna is hardwired, outdoors, larger than a two-person cabin, or going up or down stairs. Those are the moves where panels crack and wires get pinched.

What a professional charges depends on the sauna's type and size, the distance, stairs, and whether electrical work is included on both ends. Get a written quote that names all of those. If the company that sold you the sauna offers relocation, ask them first, since they know the hardware.

If you're moving it because you're selling it, skip the move. When a sauna sells on Commonplace, our crew handles the takedown, wraps the panels, hauls it and delivers it to the buyer. You can read how it works, see what similar models go for on our used sauna price index, or check what a used sauna costs by type. We also have a guide on how to sell a sauna without losing money.

Sauna Moving FAQ

Can you disassemble an infrared sauna and move it?

Yes. Most infrared saunas are panel kits that come apart in the reverse order they were built. Label every panel, bag the hardware by joint, and photograph the wire connectors before you unplug them.

How many people does it take to move a sauna?

Two for a one or two person indoor sauna. Three for larger cabins, mainly for lifting the roof and the long wall panels. Barrel saunas usually need a crew or equipment.

Do I need an electrician to move a sauna?

Only if it's hardwired. A plug-in infrared sauna just unplugs. A hardwired heater should be disconnected and reconnected by a licensed electrician.

Can you move a barrel sauna in one piece?

Often, yes, with a trailer, the right equipment and a clear path. Taking a barrel sauna apart stave by stave is possible but slow, and reassembly is harder than with a panel sauna.

Selling instead of moving? List your sauna on Commonplace and we handle the takedown and delivery. Looking for one? Browse used saunas for sale, inspected and delivered.